Operate in a closed system with enhanced ventilation. Operators must be specially trained and strictly adhere to operating procedures. It is recommended that operators wear self-priming filter dust masks, chemical safety goggles, protective clothing against toxic substances, and rubber gloves. Keep away from sources of ignition and heat; smoking is strictly prohibited in the workplace. Use explosion-proof ventilation systems and equipment. Avoid generating dust. Avoid contact with oxidizers. Handle with care during transport to prevent damage to packaging and containers. Equip the workplace with appropriate types and quantities of fire-fighting equipment and spill response equipment. Empty containers may contain hazardous residues.
Contact Handling
- Skin Contact: Remove contaminated clothing and rinse with plenty of running water.
- Eye Contact: Lift eyelids and rinse with running water or saline solution. Seek medical attention.
- Inhalation: Move to fresh air. If breathing is difficult, administer oxygen. Seek medical attention.
- Ingestion: Drink plenty of warm water and induce vomiting. Seek medical attention.
- Fire Extinguishing Methods: Firefighters must wear gas masks and full protective suits and fight the fire from upwind. Extinguishing agents: water spray, foam, dry powder, carbon dioxide, sand.
Leakage Emergency Handling
Emergency Handling: Isolate the contaminated area and restrict access. Eliminate ignition sources. Emergency responders should wear dust masks (full face masks) and protective clothing. Avoid dust generation; carefully sweep up the spilled material, place it in a bag, and transfer it to a safe location. For large leaks, cover with plastic sheeting or tarpaulin. Collect and recover the spilled material or transport it to a waste disposal site for treatment.